dqgan generator

QSK50 for Data Center Continuous (DCC) Rating

Frequency (Hz) 50, 60
Certification N/A

Select an Application


Cummins® commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for Data Center applications.

Bore: 159 mm (6.25 in.)

Stroke: 159 mm (6.25 in.)

Displacement: 50.3 litres (3067 in3)

Configuration: Cast iron, V 16 cylinder

Battery capacity: 1800 amps minimum at ambient temperature of 0 °C (32 °F)

Battery charging alternator: 55 amps

Starting voltage: 24 volts, negative ground

Fuel system: Cummins’ modular common rail system

Fuel filter: Two stage spin-on fuel filter and water separator system. Stage 1 has a three element 7 micron filter and stage 2 has a three element 3 micron filter.

Air cleaner type: Dry replaceable element

Lube oil filter type(s): Four spin-on, combination full flow filter and bypass filters

Standard cooling system: High ambient cooling system

Generator Model Hz Data Center Continuous kVA / kW Spec Sheet
DQGAN 50 1275 / 1020 S-1644DC
DQGAH 50 1400 / 1120 S-1644DC
DQGAK 50 1400 / 1120 S-1646DC
DQGAE 60 1419 / 1135 S-1614DC
DQGAG 50 1540 / 1232 S-1644DC
DQGAJ 50 1540 / 1232 S-1646DC
DQGAM 50 1650 / 1320 S-1644DC
DQGAF 60 1706 / 1365 S-1614DC

Data Center Continuous (DCC) - Applicable for supplying power continuously to a constant or varying electrical load for unlimited hours in a data center application.

Uptime Compliant - Meets the requirement of a Tier III and IV data center site by being rated to run for unlimited hours of operation when loaded to 'N' demand for the engine generator set.

Cummins heavy-duty engine - Rugged 4- cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Permanent Magnet Generator (PMG) - Offers enhanced motor starting and fault clearing short circuit capability.

Control system - The PowerCommand® digital control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protective relay, output metering

and auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Cooling system - Standard and enhanced integral set-mounted radiator systems, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.

NFPA - The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.

Warranty and service - Backed by a comprehensive warranty and worldwide distributor network.

To access our complete brochure library, click here.
Redirecting to

The information you are looking for is on

We are launching that site for you now.

Thank you.