INCAL DVD shipments for April 2020 will be delayed due to manufacturing delays caused by the COVID-19 outbreak. For immediate needs, please download the INCAL DVD content which can be found below.
INCAL is a subscription DVD set that is mailed out and has a complete list of current ECM calibrations for INSITE.
The InCal Software distribution website is intended for InPower users at a global level who support Cummins products and services.
Your company’s firewall may inhibit the installation of this file. Please contact your system administrator for assistance if you receive such a message.
To sign up for an INCAL yearly subscription please contact your local distributor to purchase the appropriate DVD. The standard duration of a INCAL subscription is one year from time of purchase. After one year the subscription status expires, requiring the user to purchase a new subscription to continue receiving the INCAL DVD in the mail.
PC Drive Requirements
INCAL is available on DVD-ROM disks in two disk formats:
- Single Layer DVD-ROM (4.3GB Capacity)
- Dual Layer Double Density DVD-ROM (8.3GB Capacity)
INCAL DVD Part Numbers
- Full INCAL DVD: 3886398
- SIR INCAL DVD: 4358618*
- RMI INCAL DVD: 4358619**
* SIR (Service Information Regulation): Beginning with the EPA 2013 engine launches, the SIR requires that Cummins Inc. provide the applicable INSITE calibrations to interested parties not affiliated with the Cummins Authorized service channel. The INCAL DVD contains all the MidRange and Heavy-Duty calibrations for EPA 2013 and beyond automotive applications.
** RMI (Repair and Maintenance Information): For heavy duty vehicles, such as buses or trucks, RMI provisions were introduced by co-decision Regulation 595/2009 (Euro VI), the implementing measures were introduced in 64/2012 which requires that Cummins Inc provide the applicable INSITE calibrations to interested parties not affiliated with the Cummins Authorised service channel. The INCAL DVD contains all the MidRange and Heavy-Duty calibrations for Euro VI and beyond automotive applications.
INCAL DVD Lifespan
INCAL DVDs are only valid for seven months from date of release. Calibrations are updated on a regular basis, and newer INCAL DVDs should be used to ensure you have the latest and most accurate calibrations.
DVD Shipping Frequency
Full INCAL DVD
- Release Cycle Months: February, April, June, August, October, December
- Shipping Locations: Global
SIR INCAL DVD
- Release Cycle Months: March, June, September, December
- Shipping Locations: North America Only
Current version available: June 2021 (The INCAL downloads are updated every 2 months).
Changes in Calibrations
New engine control module (ECM) calibration codes have been released using industry standard encryption for all electronically controlled engine products. These ECM calibration codes are only supported in Cummins INSITE™ electronic service tool version 8.7.0 and newer. If users do not upgrade, users will not be able to use any calibrations on these INCAL DVDs or downloaded through Quickserve Online (QSOL) or Cal over web. Any previous INCAL DVDs are still supported during the existing expiration dates.
INCAL DVD Cover Letter and DVD Details located HERE
DOWNLOAD Disk 1 ZIP (7.7 GB)
DOWNLOAD Disk 2 ZIP (7.7 GB)
DOWNLOAD Disk 3 ZIP (7.7 GB)
DOWNLOAD Disk 4 ZIP (7.7 GB)
DOWNLOAD Disk 5 ZIP (7.8 GB)
|Aftertreatment_Diesel_Exhaust_Fluid_Controller.zip||2.3 MB||Database expires 6/4/2021|
|Aftertreatment_Diesel_Exhaust_Fluid_Dosing_Unit.zip||1.2 MB||Database expires 6/4/2021|
|Electric_Fuel_Lift_Pump.zip||168.6 KB||Database expires 6/4/2021|
|Engine_Fuel_Supply_Pump.zip||260.8 KB||Database expires 6/4/2021|
|Fuel_Control_Valve.zip||57.3 KB||Database expires 6/4/2021|
|Ignition_Control_Module.zip||746.3 KB||Database expires 6/4/2021|
|Throttle_Actuator.zip||263.7 KB||Database expires 6/4/2021|
|Turbo_Actuator_Controller.zip||2.5MB||Database expires 6/4/2021|
|Turbocharger_Compressor_Bypass_Control_Valve.zip||67.5 KB||Database expires 6/4/2021|
2 Zip Files - June 2021 (compatible with 8.7.0 and greater)
1 Zip File - June 2021 (compatible with 8.7.0 and greater)
If your vehicle has an OEM engine installed from Case New Holland (CNH), the calibration files are NOT available from Quickserve Online (QSOL). Please check the following text file for the calibration files. If they are listed, you will need to use the version of Insite bundled with the CNH Electronic Service Tool (EST). If you are not a CNH dealer, consult your nearest CNH dealer. Click Here for Calibration Details
This software is not available on mobile. To download for your office or home computer, please return to this page from that device.